Home  |  About us  |  Products  |  News  |  Equipments  |  Service  |  Feedback  |  Contact us  |  Chinese
    Drying Equipments
    Pulverizing Equipments
    Mixing Equipments
    Granulating Equipments
    Pharmacy Equipments
    Other Equipments
Name:Changzhou FengQi Drying
Equipment Co., LTD.
Tel:0086-519-88901368
Address:Jiaoxi Town
Mobile:013906116162
Fax:0086-519-88901360
E-mail:fqdry@cnfqdry.com
Contact:Mr.Gu
Location > Home > Products > Drying Equipments > YZG/FZG Series Vacuum Dryer
Products
YZG/FZG Series Vacuum Dryer
YZG/FZG Series Vacuum Dryer
It is well known that vacuum drying is to put raw material under the ……
Live Messenger   Skype Me   QQ Me
  
Details


Applications
    It is well known that vacuum drying is to put raw material under the state of vacuum for heating and drying. If use vacuum to pump air and humidity out, the dry speed will be faster.
    Note: if use condenser, the solvent in raw material can be recovered. If the solvent is water, condenser might be canceled and the investment and every could be saved.

Features:
● Under the condition of vacuum, the boiling point of raw material will decrease and make the evaporation efficiency higher. Therefore for a certain amount of heat transfer, the conducting area of dryer can be saved.
● The heat source for evaporation may be low pressure steam or surplus heat steam.
● The heat loss is less.
● Before drying, the treatment of disinfection may be carried out. During the period of drying, there is no impurity material mixed. It is in conformity with the requirement of GMP.
● It belongs to static dryer. So the shape of raw material to be dried should not be destroyed.

 

 

Model

YZG-600

YZG-800

YZG-1000

YZG-1400A

FZG-10

FZG-15

FZG-20

Inside size of chambermm

φ600×976

φ800×1247

φ1000×1527

φ1400×2054

1500×1060×
1220

1500×1400
× 1220

1500×1800
× 1220

Outer size of chambermm

1135×810×
102

1700×1045×
1335

1693×1190×
150

2386×1675×
1920

1924×1720
×1513

1513×1924
×2060

1924×2500
× 1513

Layers of baking shelf

4

4

6

8

5

8

12

Interval of each layermm

81

82

102

102

122

122

122

Size of baking traymm

310×600×45

520×410×45

520×410×45

460×640×45

460×640
×45

460×640
×45

460×640
×45

Quantity of baking tray

4

8

12

32

20

32

48

Woking pressure inside of the pipe of baking supportMPa

≤0.784

≤0.784

≤0.784

≤0.784

≤0.784

≤0.784

≤0.784

Operation temperature of baking support

35-150

35-150

35-150

35-150

35-150

35-150

35-150

Vacuum degree inside the chamberMPa

-0.1

-0.1

-0.1

-0.1

-0.1

-0.1

0.1

Under the condition of -0.1MPaand temperature of 110evaporation rate of water (kg/m2·hr)

7.2

7.2

7.2

7.2

7.2

7.2

7.2

When condenser is used,the power of vacuum pump (kw)

2X-15A 2KW

2X-30A 3KW

2X-30A 3KW

2X-70A 5.5KW

2X-70A 5.5KW

2X-70A 5.5KW

2X-90A 2KW

When condenser is not used,the power of vacuum pump (kw)

SZ-0.5 1.5KW

SZ-1 2.2KW

SZ-1 2.2KW

SZ-2 4KW

SZ-2 4KW

SZ-2 4KW

SZ-2 5.5KW

Weight of drying chamberkg

250

600

800

1400

1400

2100

3200

V mixer series of products for efficient asymmetric V-mixer, it applies to chemical, food, medicine, feed, ceramics, powder metallurgy and other industries or granule-like material mixed. V mixer reasonable structure, simple operation closed, easy access to materials, (manual or vacuum feeding) tube made ​​of stainless steel for easy cleaning, is one of the enterprise infrastructure. V mixer unique structure, mixing, high efficiency, no accumulation of material. The whole structure is simple, easy to operate. The outer surface and material contact parts are high quality stainless steel, beautiful appearance, maintenance, easy to clean.
Mixing equipment is often called the agitator (or stirred tank), when the mixing device, when used as a reactor, also known as the stirred tank reactor, sometimes referred to as the reactor. Kettle body structure type is usually vertical cylindrical, its height to diameter ratio of the operation is mainly based on liquid containers and the loading height to diameter ratio coefficient size. The container loading liquid height to diameter ratio and nature of the materials as container, mixing characteristics and blender layers vary, generally take 1 to 1.3, maximum up to 6. Kettle at the end of the shape of flat, oval bottom, cone bottom, etc. and sometimes also with a square kettle. Meanwhile, according to the process of heat transfer requirements, kettle jacket can be added in vitro, and through the steam, cooling water and other heat-carrying medium; when insufficient heat transfer area, but also within the body set up in the reactor coil and so on.
Drying machine is electric power, diesel power, wind, combustible force of heated air used to generate power, transported to through around, and then to the appropriate temperature dehumidification process. 1, dry strength, due to highly dispersed material in the air, particles of all effective surface area of ​​active dry. 2, 3 drying time is short, simple structure, air dryer, small footprint, easy construction and maintenance. 4, large capacity, high thermal efficiency. When combined with water, non-drying, the thermal efficiency of up to 60%. 5, the dryer to achieve a "zero thrust", greatly reducing the gear wheel wear, cylinder smooth and reliable operation; 6, drying machine, "self-aligning roller-type device", the roller and roll forever ring with linear contact, thus greatly reducing wear and power loss;
Ribbon blender blades to screw strip, the number of snails with two to three, to be installed in the center of the screw mixer, screw-type mixer with a spiral with a pitch diameter of the decision. Ribbon blender is usually operated in the laminar flow state for the high viscosity of the liquid and plastic fluid to be mixed.
Home | About us | Products | News | Equipments | Service | Contact us | Privacy Statement | XML
Copyright Changzhou FengQi Drying Equipment Co.,Ltd. Professional supply V mixer,Mixing equipment,Drying machine,Ribbon blender
Address:Jiaoxi Town, Wujin District, ChangZhou City , Jiangsu Province, China. E-Mail:fqdry@cnfqdry.com Tel:0086-519-88901368  Fax:0086-519-88901360