¡¡¡¡Home¡¡¡¡|¡¡¡¡About us¡¡¡¡|¡¡¡¡Products¡¡¡¡|¡¡¡¡News¡¡¡¡|¡¡¡¡Equipments¡¡¡¡|¡¡¡¡Service¡¡¡¡|¡¡¡¡Feedback¡¡¡¡|¡¡¡¡Contact us¡¡¡¡|¡¡¡¡Chinese
    Drying Equipments
    Pulverizing Equipments
    Mixing Equipments
    Granulating Equipments
    Pharmacy Equipments
    Other Equipments
Name:Changzhou FengQi Drying
Equipment Co., LTD.
Address:Jiaoxi Town
Location > Home > Products > Drying Equipments > PLG Series Continual Plate Dryer
PLG Series Continual Plate Dryer
PLG Series Continual Plate Dryer
PLG Series Continual Plate Dryer
Live Messenger   Skype Me   QQ Me
      PLG Series Continual Plate Dryer is a kind of high effective conducting and continuous drying equipment. Its unique structure and operating principle determine that it has advantages of high heat efficiency, low energy consumption, small occupying area, simple configuration, easy operating and control as well as friendly operating environment etc. It can be widely used in drying process in the fields of chemical industry. Pharmaceuticals, agricultural chemicals, foodstuff, fodder, process of agricultural and sideline products etc, and is well received by various sectors in their practical usage. Now there are three big categories, named normal pressure, closed and vacuum styles; four sizes of 1200, 1500, 2200 and 3000; and three kinds of materials, namely A(carbon steel), B(stainless steel used for those all parts where materials are contacted) and C(on the basis of B to add stainless steel materials for vapor pipes, main shaft and support, and stainless steel linings for cylinder body and top cover). With a drying area being from 4 to 180 square metres, now we have hundreds of models of series products and various kinds of auxiliary devices available to meet requirements of drying materials for customers.

(1) Easy control, wide application
1. Regulate thickness of materials, rotating speed of main shaft, number of harrow¡¯s arm, style of and sizes harrows achieve best drying process.
2. Each layer of drying plate can be fed with hot or cold media individually to heat or cold materials and make temperature control accurate and easy.
3. Dwell time of materials can be accurately adjusted.
4. Single flowing direction of materials without return flowing and mixing, uniform drying and stable quality, no re-mixing is required.

(2) Easy and simple operation
1. Start stop of dryer is quite simple
2. After material feeding is stopped, they can be easily discharged out of the products by harrows.
3. Careful cleaning and observation can be carried inside the equipment through large-scale viewing window.

(3) Low energy consumption
1. Thin layer of materials, low speed of main shaft, small power and energy required for conveying system of materials.
2. Dry by conducting heat so it has high heating efficiency and low energy consumption.

(4) Good operation environment, solvent can be recovered and powder discharge meet the requirements of exhaust.
1. Normal pressure type: as low speed of air flow inside the equipment and moisture being high in upper part and low in lower part, dust powder couldn¡¯t float to the equipment, so there is almost no dust powder in tail gas discharged from the moist discharge port on the top.
2. Closed type: equipped with solvent recovery device that can recover organic solvent easily from moist-carrier gas. The solvent recovery device has simple structure and high recovery rate, and nitrogen can be used as moist-carrier gas in closed circulation for those subject to burning, explosion and oxidation, and poisonous materials in order for safe operation. Especially suitable for drying of flammable, explosive and poisonous materials.
3. Vacuum type: if the plate dryer is operating under vacuum state, it is particularly suitable for drying heat sensitive materials.

(5) Easy installation and small occupying area.
1. As the dryer is in a whole for delivery, it is quite easy to install and fix at site only by hoisting.
2. As drying plates being arranged by layers and installed vertically, it takes a small occupying area though drying area is large.

Drying, heat decomposition, combustion, cooling, reaction, and sublimation
1. Organic chemicals
2. Mineral chemicals
3. Pharmaceutical and foodstuff
4. Feed and fertilizer

Features of technology:
1.Drying plate
(1). Designing pressure: general is 0.4MPa, Max. can reach 1.6 Mpa.
(2).Work pressure: general is less then 0.4Mpa, and Max. can reach 1.6 Mpa.
(3).Heating medium: steam, hot water, oil. When the drying plates¡¯ temperature is 100¡æ, hot water can be used; when 100¡æ~150¡æ, it will be saturated water steam ¡Ü0.4Mpa or steam-gas, and when 150¡æ~320¡æ, it will be oil.

2.Material transmission system
(1).headstock revoluton:1~10 rpm, electromagnetism of transducer timing.
(2).harrow arm: There are 2 to 8 pieces arm that be fixed on the headstock on the every layers.
(3). Harrow¡¯s blade: Surrounding the harrow¡¯s blade, float together with the surface of the plate to keep contact. There¡¯re various of types.
(4). Roller: for the products easily agglomerate, or with the requirements of grinding, the heat transfer and drying process might be reinforced by placing roller(s) at the appropriate place(s).

3. Shell There¡¯re three types for option: normal pressure, sealed and vacuum
(1). Normal pressure:
(2). Sealed: Cylindrical shell, could bear the interior pressure of 5KPa, the main ducts of the inlet and outlet of heating media might be inside of the shell or outside.
(3). Vacuum: Cylindrical shell, could bear the exterior pressure of 0.1MPa. The main ducts of inlet and outlet is inside of the shell.

4. Air heater:
Normal for the application of big evaporation capacity to increase drying efficiency.

     Wet materials are fed continuously to the first dryinglayer on the top of the dryer. They will be turned and stirred by rakes when the rake arm rotates and drop down to  the outer edge of the large drying plate along the exponential helical line. On the small drying plate they will be moved to its outer edge and drop down to the outer edge of the large drying plate underneath, and will be moved inward and drop down from its central hole to the small drying plate on the next layer. Both small and large drying plates are arranged alternately so as materials can go through the whole dryer continuously. The heating media, Which could be informs of saturated steam, hot water or heat conducting oil will be led into hollow drying plates from one end to the other end of the dryer. The dried materials will drop from the last layer of the drying plate to the bottom layer of the shell body, and will be moved by rakes to the dischargeport. The moisture escapes from materials and will be removed trom the moist discharge port on the top cover, or sucked out by the vacuum pump on the top cover for vacuum-type plate dryer. The dried materials discharged from the bottom layer can be packed directly. The drying capability can be  raised up if equipped with supplementary devices such as  finned heater, condenser for solvent retrieval, bag dust remover, return and mix mechanism for dried materials and drawing  fan etc. Solvent in those dried paste and heat sensitive materials can be easily retrieved, and thermal decomosition and reaction can be also carried out.
Type £¨mm£©
Height£¨mm£© Dryingarea (m2) Power£¨KW£© Type £¨mm£©
Height£¨mm£© Drying area (m2) Power£¨KW£©
1200/4   1850 2608 3.3 1.1 2200/18   2900 5782 55.4 5.5
1200/6 3028 4.9 2200/20 6202 61.6
1200/8 3448 6.6   1.5 2200/22 6622 67.7   7.5
1200/10 3868 8.2 2200/24 7042 73.9
1200/12 4288 9.9 2200/26 7462 80.0
1500/6   2100 3022 8.0   2.2 3000/8       3800 4050 48   11
1500/8 3442 10.7 3000/10 4650 60
1500/10 3862 13.4 3000/12 5250 72
1500/12 4282 16.1   3.0 3000/14 5850 84
1500/14 4702 18.8 3000/16 6450 96
1500/16 5122 21.5 3000/18 7050 108   13
2200/6     2900 3262 18.5   3.0 3000/20 7650 120
2200/8 3682 24.6 3000/22 8250 132
2200/10 4102 30.8 3000/24 8850 144
2200/12 4522 36.9 4.0 3000/26 9450 156   15
2200/14 4942 43.1 3000/28 10050 168
2200/16 5362 49.3 5.5 3000/30 10650 180
Remarks:Some of the parameters are for reference only.When design they will change according
V mixer series of products for efficient asymmetric V-mixer, it applies to chemical, food, medicine, feed, ceramics, powder metallurgy and other industries or granule-like material mixed. V mixer reasonable structure, simple operation closed, easy access to materials, (manual or vacuum feeding) tube made ​​of stainless steel for easy cleaning, is one of the enterprise infrastructure. V mixer unique structure, mixing, high efficiency, no accumulation of material. The whole structure is simple, easy to operate. The outer surface and material contact parts are high quality stainless steel, beautiful appearance, maintenance, easy to clean.
Mixing equipment is often called the agitator (or stirred tank), when the mixing device, when used as a reactor, also known as the stirred tank reactor, sometimes referred to as the reactor. Kettle body structure type is usually vertical cylindrical, its height to diameter ratio of the operation is mainly based on liquid containers and the loading height to diameter ratio coefficient size. The container loading liquid height to diameter ratio and nature of the materials as container, mixing characteristics and blender layers vary, generally take 1 to 1.3, maximum up to 6. Kettle at the end of the shape of flat, oval bottom, cone bottom, etc. and sometimes also with a square kettle. Meanwhile, according to the process of heat transfer requirements, kettle jacket can be added in vitro, and through the steam, cooling water and other heat-carrying medium; when insufficient heat transfer area, but also within the body set up in the reactor coil and so on.
Drying machine is electric power, diesel power, wind, combustible force of heated air used to generate power, transported to through around, and then to the appropriate temperature dehumidification process. 1, dry strength, due to highly dispersed material in the air, particles of all effective surface area of ​​active dry. 2, 3 drying time is short, simple structure, air dryer, small footprint, easy construction and maintenance. 4, large capacity, high thermal efficiency. When combined with water, non-drying, the thermal efficiency of up to 60%. 5, the dryer to achieve a "zero thrust", greatly reducing the gear wheel wear, cylinder smooth and reliable operation; 6, drying machine, "self-aligning roller-type device", the roller and roll forever ring with linear contact, thus greatly reducing wear and power loss;
Ribbon blender blades to screw strip, the number of snails with two to three, to be installed in the center of the screw mixer, screw-type mixer with a spiral with a pitch diameter of the decision. Ribbon blender is usually operated in the laminar flow state for the high viscosity of the liquid and plastic fluid to be mixed.
Home¡¡|¡¡About us¡¡|¡¡Products¡¡|¡¡News¡¡|¡¡Equipments¡¡|¡¡Service¡¡|¡¡Contact us¡¡|¡¡Privacy Statement¡¡|¡¡XML
Copyright Changzhou FengQi Drying Equipment Co.,Ltd. Professional supply V mixer,Mixing equipment,Drying machine,Ribbon blender
Address£ºJiaoxi Town, Wujin District, ChangZhou City , Jiangsu Province, China. E-Mail£ºfqdry@cnfqdry.com Tel£º0086-519-88901368 ¡¡Fax£º0086-519-88901360